Computer-aided manufacturing (CAM) software converts computer-aided design (CAD) models into information that can be used by machines on the shop floor. This type of software helps manufacturing companies optimize the process of transforming raw materials and components into finished products. CAM software delivers information on how different types of equipment should perform production operations such as cutting, milling, and roughing. This type of software is leveraged by production managers to prepare and plan production operations, as well as by shop floor employees to use the equipment efficiently and safely.
CAM software is typically used in conjunction with CAD or product lifecycle management software. It may also need to integrate with other software products used in manufacturing such as ERP systems or manufacturing execution systems.
To qualify for inclusion in the CAM category, a product must:
Fusion 360 unifies design, engineering, and manufacturing into a single platform. It allows you to connect your disconnected product development process to deliver high-quality products to market faster and positively impact your bottom line. Fusion 360 is a fully integrated CAD, CAM, and CAE software that includes generative design, 2.5, 3, 4, & 5 axis machining, and advanced simulation and is available on PC or Mac.
SOLIDWORKS CAM is an add-on to all versions of SOLIDWORKS CAD that lets you prepare your designs for manufacturability earlier in the development cycle. Manufacturing tasks that had to wait until a design was complete can now be performed concurrently with the design process
ESPRIT system offers powerful programming for any CNC machine tool. ESPRIT's full-spectrum functionality includes programming for 2-5 axis milling, 2-22 axis turning, 2-5 axis wire EDM, multitasking mill-turn machining, and B-axis machine tools. Streamline your operations with the powerful and flexible ESPRIT system, valued by CNC programmers for its extensive suite of machining cycles, comprehensive tool control, and capacity to fully support an entire shop.
VisualCAD/CAM features MecSoft's FREE and easy-to-use CAD program VisualCAD, which is the host platform for the VisualCAM and Visual3DPRINT plug-in products.VisualCAM is MecSoft's flagship CAM software product that addresses the CNC machining market needs with modules VisualMILL, VisualTURN, VisualNEST, and VisualART to address specific needs of various CNC manufacturing processes.
AlibreCAM is a Computer Aided Manufacturing(CAM) plug-in that runs completely inside of Alibre Design 2018 3D CAD software. AlibreCAM merges the power of Alibre Design's parametric modeling with the legendary machining capabilities of MecSoft's flagship CAM Software, VisualCAM. AlibreCAM 2018 runs seamlessly within the Alibre Design user interface, giving you only one interface to learn.
BobCAD-CAM provides CNC programming solutions for mill, mill turn, lathe, router, laser, plasma, waterjet, and wire EDM machines. Our CAD/CAM systems offer powerful CAD functionality for design combined with toolpath and complete G Code producing functions that makes CNC software programming simple.
Cimatron's CAD/CAM solutions address the entire tool making process from quoting to design, applying engineering changes and NC programming. Cimatron delivers major advantages for mold, die and manufacturing shops keeping you more competitive across your entire range of operations
EXAPT represents 3D-CAD/CAM software solutions - from design to production - and offers its customers software for NC planning, production data and tool management.The extensive EXAPT technology with the emphases turning, drilling and milling enables an efficient programming solution for complex workpiece requirements with up to 5-axis simultaneous machining.
EZ-CAM was one of the first PC based CAM systems to enter the market and offers innovative, productive, affordable manufacturing solutions. From simple and easy to use 2 axis milling and turning to full 3 and 4 axis Milling, Mill/Turn, 5 axis Wire EDM and arc G-code Optimization.
GMSWorks 4.4 is the latest release of the CAD/CAM software that helps engineers design and manufacture complex parts. This computer aided design and manufacturing (CAD/CAM) software package includes a full integration of the new DESIGNBASE advanced modeling kernel, featuring superior free form surface and solid geometry modeling and unmatched design editing capabilities.
hyperMILL is a modular and flexible CAM solution for 2.5D, 3D and 5-axis milling as well as mill turning and machining operations such as high-speed cutting (HSC) and high-performance cutting (HPC), with everything integrated in a single interface. The special applications for milling impellers, blisks, turbine blades, tubes and tire moulds round off the range of functions available in hyperMILL.
IMSverify provides a unique NC verification solution to check the postprocessed code that will run on the machine. This goes beyond simple APT or CL file verification within the CAM system. Verification of the actual G-code that will run on the machine provides you with complete confidence that the part will be cut correctly.
Lantek's nesting CAD/CAM software optimizes the material yield and the quality of the results to the maximum.Lantek Expert provides the most advanced nesting algorithms and mechanization strategies (Thinkingmetal Technology) for any of the existing cutting (laser, plasma, oxy-fuel, water jet technologies) and punching machines.
MachineWorks functionality gives CAM software manufacturers the ability to simulate and verify their toolpaths. Our true-solid engine allows collisions to be detected and simulated with high quality animations that are built on OpenGL or DirectX graphics. For complex machining, MachineWorks’ kinematics allow full machine simulation to ensure that all clashes and gouges are detected anywhere in the machining environment.
Concepts NREC’s MAX-PAC family of CAM software provides optimal cutter-path solutions for turbomachinery components by offering users several cutting strategies that can reduce engineering costs as well as production costs. MAX-PAC is available in any combination of modules to suit part geometry requirements for flank milling of ruled-surface blading, point milling of arbitrary-surface blading, point milling of integrally shrouded impellers, or milling of single blades.
NCL is a powerful Computer-Aided Manufacturing system designed to provide a maximum degree of flexibility in creating tool paths to produce machined parts of any complexity. NCL offers a unique blend of automated and user-controlled tool path generation techniques that result in reduced programming time and increased quality.
NCSIMUL 4CAM is the NCSIMUL SOLUTIONS module that complements existing CAMs to simplify NC programming and increase the flexibility of CNC machines. It allows to change machines on the fly without new CAM programming.From the main CAMs (CATIA, NX, CREO, TOPSOLIDCAM, MASTERCAM, ...) or existing NC programs (ISO format), NCSIMUL 4CAM directly generates, without external post-processor, native NC programs, verified and optimized taking into account physical means of the workshop (tools, cutting conditions, kinematics, machine controllers ...)
ProfiCAM VM - NC,programming for turning and milling machines as well as turn mill (Millturn) machines,creates integrated processes, minimizes throughput times and increases reliability - for maximum quality, process reliability and cost efficiency. ProfiCAM VM includes CAM technologies for the calculation of highly efficient toolpaths.
The SmartCAM product line consists of computer-aided manufacturing products for CNC Milling, Turning/Lathes, Fabrication and Wire EDM. Additionally SmartCAMcnc offers native format data translators for SOLIDWORKS and Autodesk Inventor and other native CAD systems, and software subscription agreements that provide product updates, superior technical support and much more.
The SmartPACK lineup consists of SmartCUT for automatic detection and elimination of time-wasting air-cuts, SmartFEED for intelligent feed-rate adjustment based on depth-of-cut and SmartPATH for advanced tool-path optimization. Better yet, when used as part of ICAM’s Adaptive Post-Processing technology, it can perform all these operations simultaneously, without the need for excessive CAM reprogramming and retesting.
Surfcam is a market leading computer aided manufacturing (CAM) system for NC part programming. With unparalleled ease of use and sophisticated toolpath generation, it's the only CAM system you'll need for milling, turning and mill-turn machining. Surfcam utilizes in house knowledge and experience to drive the CAM process with automation tools to suit different applications - allowing to maintain your competitive edge.